| Abrasives: |
family of smoothing tools including, sandpaper, grit paper, steel wool, sand sticks, sand blocks, taping and cording. Abrasives can be dry or wet. |
| Adhesives: |
substance or chemical mixture used to temporarily or permanently bond two surfaces or items |
| Awl: |
sharp pointed usually metal tool for hand punching holes or openings |
| Bevel: |
instrument to balance or make centered |
| Blending Stump: |
paper or soft textile stick used to blend pencil colors, chalk, pastels, or charcoal |
| Bone: |
hard wood tool used to score other materials |
| Bow Saw: |
hand held saw with thick blade anchored onto angled metal bridge, rough cutting |
| Brad Point Bit: |
bit used on rounded surfaces for smoother cut or boring. |
| Brayer: |
similar to a rolling pin used to smooth or flatten materials |
| Brush: |
natural or man made bristles gathered and clamp to transport a medium to another medium; sponge, round, flat, stencil, and more |
| Burnisher: |
metal or wood instrument used to smooth, shape, embellish, polish, or transfer one material to another; also referred to as a embossing tool |
| Calipers: |
metal instruments used in measuring, inside and outside measurements use different calipers |
| Chisel: |
metal tools used to create decorative work in wood or create edges. |
| Circular Saw: |
hand held power tool with round or circle blade, rough to detail cuts |
| Clamps: |
work holding device; C-clamps, bar, pipe, hand-screw, band, web, and specialty |
| Coping Saw: |
hand held saw with thin cutting blade that is anchored across a metal bridge, fine cutting |
| Drill: |
portable tool that can be hand held or placed in a press, used to bore holes, but anything is possible with the variety of bits available today. |
| Files: |
hardened steel with rows of finely spaced cutting teeth for smoothing, trimming and sharpening |
| Hammer: |
hard or soft head with handle to pound smooth or insert one item into another, over 30 varieties for specific tasks. Include the mallet which is a rubber headed tool |
| Kiln: |
like an oven used in ceramic to heat or fire work |
| Lathe: |
tool that allows carving or decoration of wood with a spinning or turning motion while wood is clamped to machine. |
| Loom: |
frame used to weave materials or hold materials in place. |
| Miter Box: |
guide created to give accurate cutting of angle |
| Needle: |
instrument with eye which can be threaded with thin materials, point is sharp or blunted |
| Mold: |
used to cast or shape mediums or materials |
| Palette Knife: |
shaped like a pie cutter, used to transfer medium, smooth medium, or texture medium |
| Plane: |
used to smooth or flatten wood, hand held or power |
| Radial Arm Saw: |
power saw with round blades used where the material is stationary and the saw moves to cut |
| Ribs: |
smooth hand size wood pieces with edges in different degrees of texture used to shape clays or other modeling mediums |
| Rifflers: |
files with very small heads and large hand grips for detail work |
| Router: |
portable power tool with changeable bits for variety of tasks from cutting to edging |
| Ruler: |
also referred to in soft form as a tape, measurements in inches and meters |
| Sabre Saw: |
hand held power tool which only one end of straight blade is attached to saw |
| Smoldering Iron: |
heating tool used to melt metals or transfer metal to a surface |
| Square: |
wood and metal tool used to make correct corners, edges, and cuts |
| Staple Gun: |
hand or power tool that shoots staples or nails into material |
| Stylus: |
metal rounded tip used to create perfect, consistent dots |
| Table Saw: |
Stationary saw with a round blade use where material is moved to cut. |
| Tack Cloth: |
very sticky cloth or fabric used to remove fine particles or dust from wood, metal, ceramic, etc. |
| Tjanting: |
holds wax to use in applying lines of wax to materials as in batik |
| Trim Tool: |
used to smooth or cut materials, wires of different shapes, thickness, and widths are clamped to a hand held handle |
| Wheel: |
table with flat top that rotates or spins |
